This element is an extended model of the usual element discovered on BMX bicycles. It serves because the interface between the bicycle body and the saddle, enabling riders to regulate the peak of the seating association. For instance, riders needing the next saddle place for consolation or particular driving kinds could go for this modified half.
Some great benefits of utilizing this longer adaptation embrace improved consolation for taller riders and the potential for enhanced pedaling effectivity. Traditionally, BMX bikes favored decrease saddle positions for maneuverability throughout tips. Nevertheless, with the evolution of BMX disciplines and a wider vary of rider physiques, the necessity for adjustability and luxury has grow to be more and more important, resulting in the elevated availability and adoption of longer posts.
The next sections will delve into the issues when selecting a particular size, supplies utilized in its development, and compatibility with totally different BMX body designs. Moreover, the dialogue will deal with set up procedures and upkeep suggestions to make sure optimum efficiency and longevity.
1. Size
The essential function of size in relation to this particular BMX element can’t be overstated. It’s the major attribute dictating its utility and instantly impacts rider ergonomics. An inadequate size negates the very goal of an prolonged model, leaving the rider hunched and compromising pedaling effectivity and luxury. Conversely, extreme size can create instability and enhance the chance of bending or breakage, significantly throughout aggressive driving. The choice of the suitable size is thus not merely a matter of desire however a vital resolution primarily based on the rider’s inseam, body geometry, and meant driving model.
Take into account a rider, for instance, who has transitioned to BMX from a bigger bicycle and finds the standard-length publish leads to a cramped driving place. By deciding on an appropriately longer model, this particular person restores a extra pure leg extension throughout pedaling, lowering pressure on the knees and again. This improved ergonomic positioning, in flip, interprets to elevated energy output and decreased fatigue. One other occasion may contain a rider experimenting with totally different driving kinds. A barely longer publish can permit for extra aggressive leans and higher management throughout avenue driving maneuvers, whereas a shorter one is likely to be most well-liked for park driving the place a decrease middle of gravity is desired.
In essence, size serves because the defining attribute, mediating between the rider’s bodily necessities and the bicycle’s body. Its right evaluation and choice decide the general effectiveness of this BMX element. Challenges come up in precisely measuring inseam and predicting the perfect saddle top primarily based on body geometry and private driving preferences. The ramifications of incorrect size selections prolong past mere discomfort; they’ll considerably influence efficiency, enhance the chance of damage, and finally undermine the general driving expertise.
2. Materials
The selection of fabric in its development dictates not solely its energy and weight but additionally its longevity and total efficiency. It is a vital consideration, a silent determinant of the rider’s expertise and the element’s resilience underneath stress. The supplies used on this vertical extension are the silent protectors from unexpected circumstances.
-
Chromoly Metal: The Bastion of Energy
Chromoly metal, an alloy of chromium and molybdenum, emerges because the quintessential materials for riders prioritizing robustness. Its increased tensile energy in comparison with normal metal permits it to resist important impacts and torsional forces. As an example, a avenue rider executing a tailwhip and touchdown awkwardly locations immense stress on the seat publish. A chromoly publish is much extra prone to soak up this shock with out bending or fracturing, guaranteeing the rider can proceed their session. This resilience comes on the expense of weight; chromoly posts are sometimes heavier than their aluminum counterparts.
-
Aluminum: The Pursuit of Lightness
Aluminum, prized for its low density, presents a contrasting strategy. Riders centered on weight discount, significantly in racing disciplines, typically gravitate towards aluminum. This materials permits for faster acceleration and simpler maneuverability. Nevertheless, aluminum’s decrease energy necessitates thicker partitions, doubtlessly negating among the weight financial savings. Moreover, aluminum is extra inclined to fatigue and cracking underneath repeated stress. A park rider touchdown quite a few backflips may discover an aluminum publish growing stress fractures over time, demanding extra frequent replacements.
-
Warmth Therapy: Forging Resilience
Whatever the base materials, warmth remedy processes play an important function in enhancing its properties. Warmth treating chromoly metal can additional enhance its energy and fatigue resistance, whereas warmth treating aluminum can enhance its hardness and yield energy. These processes contain rigorously managed heating and cooling cycles that alter the fabric’s microstructure, optimizing it for particular efficiency traits. The absence of correct warmth remedy can render even high-quality supplies weak to untimely failure.
-
The Synthesis: Compromise and Optimization
The final word choice depends upon a fragile steadiness between energy, weight, and value. Riders should rigorously weigh their particular person wants and driving model in opposition to the fabric’s inherent properties. A heavier rider engaged in aggressive avenue driving will doubtless profit extra from the sturdiness of chromoly metal, whereas a lighter rider centered on racing could prioritize the load financial savings of aluminum. Understanding these trade-offs is crucial for making an knowledgeable resolution that maximizes efficiency and longevity.
These materials selections mirror the broader engineering issues that underscore BMX element design. The seek for the optimum resolution is an ongoing course of, pushed by the evolving calls for of the game and the relentless pursuit of improved efficiency. The final word willpower of fabric selection on this element is greater than a matter of desire; it’s a calculated resolution that resonates with each soar, grind, and touchdown.
3. Diameter
Diameter, within the context of the modified seating stem for BMX bicycles, represents way over a easy measurement. It’s the linchpin within the fitment, the silent arbiter of compatibility between body and element. It’s the issue figuring out the secure and proper operate of the seating association. A misjudgment on this dimension can render the half ineffective or, worse, compromise rider security.
-
The Immutable Commonplace: Outer Diameter and Body Interface
The outer diameter is dictated by the interior diameter of the bicycle body’s seat tube. Typical BMX frames adhere to established requirements similar to 25.4mm (1 inch), 27.2mm, and infrequently others. Choosing a publish with an incorrect outer diameter dangers both being too small, leading to slippage and potential injury to the body, or too massive, stopping set up altogether. An instance is likely to be a rider changing a broken stem on an older BMX with a 25.4mm seat tube. Inadvertently ordering a 27.2mm substitute would end in an unusable element. This single dimension governs the complete interplay between the bicycle and its supporting stem.
-
Shimming Options: Bridging the Gaps, Mitigating Imcompatibility
In cases the place the stem’s outer diameter is smaller than the seat tube’s inner diameter, shims skinny sleeves of steel or composite materials can bridge the hole. These shims successfully enhance the stem’s outer diameter, guaranteeing a comfortable and safe match. Nevertheless, shimming shouldn’t be a common resolution. Extreme shimming can compromise the integrity of the connection and introduce play. It’s usually really useful to make use of shims sparingly and solely when the diameter distinction is minimal. Shimming ought to by no means be utilized to pressure larger-than-required diameter right into a seat tube, underneath any circumstance.
-
Inside Diameter and Saddle Rail Compatibility
The inside diameter of the stem’s clamping mechanism dictates compatibility with the saddle rails. Frequent rail diameters are 7mm, however variations exist. Mismatched diameters can stop safe saddle attachment, resulting in instability and potential damage. A rider upgrading to a saddle with outsized rails should make sure the stem’s clamp can accommodate the brand new rail diameter. The inside diameter governs the power to adapt rider tools.
-
Wall Thickness: The Stability of Energy and Weight
Whereas not strictly a “diameter,” wall thickness, which instantly impacts the inside diameter, performs an important function. Thicker partitions improve energy and resistance to bending, whereas thinner partitions cut back weight. Producers rigorously steadiness these competing calls for to optimize the element’s efficiency. A thicker walled diameter with a shorter stem size is likely to be extra applicable than a really skinny walled diameter and longer size stem.
These diameter-related elements are interwoven into the very cloth of BMX bicycle design. Understanding their implications is crucial for making knowledgeable buying selections, guaranteeing compatibility, and sustaining rider security. Every millimeter counts; every measurement issues. The diameter stays the gatekeeper to correct meeting and safe operation.
4. Clamp Type
The juncture the place the prolonged publish meets the saddle rails is ruled by the clamp model, a vital interface figuring out safety and adjustability. The clamp model dictates not solely how firmly the saddle is held but additionally the convenience with which its angle might be adjusted, impacting rider consolation and management. The choice of a particular clamp model represents a deliberate selection, reflecting a rider’s priorities and preferences.
-
Single-Bolt Clamps: Simplicity and Light-weight Issues
The one-bolt clamp, characterised by its minimalist design, gives simplicity and weight financial savings. It secures the saddle rails with a single bolt, making changes comparatively simple. This kind is often discovered on entry-level BMX bikes and appeals to riders prioritizing weight over final clamping pressure. Nevertheless, the single-bolt design might be susceptible to slipping underneath heavy masses or throughout aggressive maneuvers. For instance, a newbie studying tailwhips may discover the saddle shifting throughout landings, necessitating frequent readjustments. The one-bolt clamp presents a trade-off between simplicity and safety.
-
Double-Bolt Clamps: Enhanced Safety and Exact Changes
Double-bolt clamps make the most of two bolts to distribute the clamping pressure extra evenly throughout the saddle rails. This design offers superior safety and reduces the chance of slippage, making it appropriate for riders engaged in additional demanding disciplines. Moreover, the double-bolt configuration typically permits for finer changes to the saddle angle, enabling riders to dial of their most well-liked driving place with larger precision. Take into account a avenue rider performing barspins and tail faucets. The added clamping pressure of a double-bolt system ensures the saddle stays firmly in place, even underneath the acute stresses of those maneuvers. Double-bolt clamps sacrifice simplicity for enhanced efficiency.
-
Pivotal Techniques: Built-in Design for Streamlined Aesthetics
Pivotal methods symbolize an built-in strategy, whereby the saddle and publish are particularly designed to interface with one another. This design eliminates the normal rail-based clamping mechanism, leading to a cleaner, extra streamlined aesthetic. Pivotal methods provide restricted adjustability, sometimes restricted to a couple pre-set angles, however present a sturdy and creak-free connection. A park rider who values a clear aesthetic and constant saddle angle may go for a pivotal system. The built-in design ensures a safe and dependable connection, minimizing the chance of slippage or loosening. Pivotal methods prioritize integration over adjustability.
-
Built-in Pivotal (Tripod) Techniques: Maximizing Energy with Three-Level Contact
Tripod methods take integration a step additional, using three bolts to safe the saddle to the publish. This design maximizes clamping pressure and stability, making it perfect for riders who demand the utmost reliability. Tripod methods, like pivotal methods, provide restricted adjustability, however the elevated energy and sturdiness make them a well-liked selection for aggressive driving kinds. A mud jumper touchdown massive jumps and performing aerial tips depends on the strong clamping pressure of a tripod system to forestall saddle motion. Tripod methods symbolize the head of built-in energy.
The selection of clamp model underscores the multifaceted nature of BMX element choice. Every possibility presents a singular mix of simplicity, safety, adjustability, and aesthetics. Understanding these trade-offs empowers riders to make knowledgeable selections, tailoring their bikes to their particular person wants and driving kinds. Clamp model stays a vital component within the total seating equation, influencing each efficiency and luxury, and guaranteeing the rider’s connection to the machine is as safe and seamless as potential.
5. Compatibility
The narrative of its choice is commonly a story of cautious measurements and cautious cross-referencing. The BMX body, a inflexible skeleton of metal or alloy, dictates the diameter of the seat tube, an unyielding aperture into which the modified stem should exactly match. The saddle, the rider’s level of contact, presents one other compatibility problem, its rails demanding a clamp mechanism able to securing them firmly. These two interfaces body to stem, stem to saddle symbolize the essential checkpoints within the compatibility saga.
Take into account the case of a BMX fanatic restoring a classic body. The body, sourced from a bygone period, adheres to non-standard dimensions. A contemporary extension, available, proves incompatible, its diameter failing to align with the body’s archaic specs. The fanatic is then confronted with a selection: both modify the body, compromising its historic integrity, or embark on a seek for a uncommon, period-correct element. This illustrates the cause-and-effect relationship at play. The body’s specs instantly dictate the vary of suitable elements, and any deviation results in both adaptation or abandonment. Equally, the saddle presents its personal hurdles. A rider upgrading to a contemporary saddle with outsized rails discovers that the stem’s clamp is ill-equipped to accommodate the thicker profile. This necessitates a substitute clamp, or perhaps a new stem altogether, to make sure a safe and useful connection.
The understanding of compatibility, subsequently, transcends mere technical specification; it embodies a vital evaluation of the interaction between numerous elements. The proper choice minimizes dangers of element failure. The lesson is evident: compatibility shouldn’t be merely a fascinating attribute, it’s a foundational requirement for security, efficiency, and total driving enjoyment. The narrative serves as a reminder that the selection shouldn’t be a matter of desire however a calculated necessity, one the place precision and diligence are paramount.
6. Weight
The consideration of mass, when selecting a BMX saddle assist extension, transcends a mere numerical worth. It embodies a fancy interaction of efficiency, sturdiness, and driving model. The burden of extra mass can diminish agility, whereas the pursuit of final lightness dangers structural integrity. Every gram shaved or added turns into a tangible component within the rider’s expertise.
-
Rotational Mass and Acceleration
Weight positioned farther from the bicycle’s middle of rotation, as is the case with an prolonged publish, exerts a disproportionate affect on acceleration and maneuverability. The larger the mass, the extra power required to provoke motion and alter path. Take into account a racer sprinting out of a beginning gate; an excessively heavy stem impedes acceleration, hindering their means to realize an early benefit. Equally, a park rider making an attempt a fast barspin finds the added inertia making the trick harder to execute easily.
-
Energy-to-Weight Ratio: The Engineering Compromise
The pursuit of a light-weight element invariably entails a trade-off with energy. Lowering materials to reduce weight can compromise the publish’s means to resist the stresses of aggressive driving. A avenue rider touchdown closely after a soar locations important pressure on the extension. If the element is excessively gentle, it could bend and even break, leading to a crash. Producers meticulously steadiness these competing calls for, using superior supplies and engineering strategies to optimize the strength-to-weight ratio.
-
Rider Fatigue and Endurance
The cumulative impact of added weight, even seemingly negligible quantities, can contribute to rider fatigue over prolonged periods. A heavier bicycle calls for extra power to propel and management, resulting in earlier exhaustion. That is significantly related for riders engaged in long-distance driving. The incremental weight of an unnecessarily heavy extension can diminish their endurance, impacting total efficiency and delight.
-
Materials Choice and Weight Implications
The selection of fabric instantly influences the load of the BMX element. Aluminum alloys, prized for his or her low density, provide important weight financial savings in comparison with metal. Nevertheless, aluminum’s decrease energy necessitates thicker partitions, doubtlessly negating among the weight benefit. Metal, whereas heavier, offers superior sturdiness and resistance to bending. The fabric choice, subsequently, represents a vital resolution, weighing the advantages of lightness in opposition to the calls for of the meant driving model.
The cautious consideration of weight, inside this narrative, reveals the intricate engineering issues that underpin BMX element design. It transcends the realm of easy numbers, reflecting a fragile steadiness between efficiency, sturdiness, and rider expertise. The refined nuances of grams and ounces translate instantly into tangible variations on the monitor, within the park, and on the road.
7. Sturdiness
Within the harsh actuality of BMX driving, the place each element is examined to its absolute restrict, its means to resist relentless abuse stands as a paramount advantage. This is not merely about longevity; it is in regards to the confidence a rider locations of their tools, understanding it will not fail at a vital second.
-
Materials Fatigue and Stress Fractures
Every soar, every touchdown, every grind imparts cumulative stress upon this element. Over time, this repeated stress can result in materials fatigue, finally culminating in microscopic cracks that propagate and weaken the construction. Take into account a avenue rider consistently touchdown closely on the saddle after performing tips. The repeated impacts slowly degrade the steel, making it susceptible to sudden fracture. The selection of fabric, warmth remedy processes, and even the element’s geometry all contribute to its resistance to fatigue.
-
Impression Resistance and Bending Forces
The BMX setting is rife with potential impacts. Whether or not it is a botched touchdown on a concrete floor or a collision with a steel rail, the stem is commonly subjected to important bending forces. A publish constructed from substandard supplies or missing enough reinforcement can deform completely, compromising its performance and doubtlessly resulting in a harmful state of affairs. Think about a rider misjudging a soar and touchdown nose-heavy. The pressure of influence can simply bend a weak publish, throwing off the rider’s steadiness and inflicting a crash.
-
Corrosion Resistance and Environmental Elements
Publicity to the weather, significantly moisture and corrosive substances, can regularly degrade this metallic element. Rust weakens the steel, making it extra inclined to failure. Coastal environments, the place salt air accelerates corrosion, pose a selected problem. A rider who often rides close to the ocean have to be diligent in cleansing and sustaining the publish to forestall untimely degradation. The selection of corrosion-resistant supplies and protecting coatings can considerably prolong the element’s lifespan in harsh environments.
-
Clamp Integrity and Slippage Prevention
The clamp mechanism, liable for securing the saddle, is a vital level of vulnerability. If the clamp is poorly designed or manufactured, it may loosen over time, permitting the saddle to slide. This slippage not solely disrupts the rider’s steadiness but additionally locations undue stress on the publish itself. An skilled rider counting on the soundness of their saddle throughout a troublesome trick will shortly lose confidence if the clamp is susceptible to slippage. A strong clamp design and high-quality fasteners are important for guaranteeing long-term reliability.
These aspects of resistance are interwoven into the very essence of BMX driving. A sturdy extension is greater than only a piece of steel; it is a lifeline, a guarantor of security, and a testomony to the rider’s unwavering confidence of their tools. In a world the place each trick calls for absolute dedication, sturdiness is the silent companion, guaranteeing that the extension performs flawlessly, journey after journey.
8. Adjustability
The story of this BMX element is inextricably linked to the rider’s quest for a personalised match. This particular element serves as a key component for riders looking for personalized settings of their seating and journey. Take into account a younger BMX rider, quickly rising, whose body nonetheless has years of life. With out the power to regulate their saddle top, the rider could be pressured to journey uncomfortably low. It permits for changes to cater for the rider. The worth of the modified element lies not simply in its elongated kind however within the vary of positions it unlocks. Every millimeter represents a possible shift in steadiness, a refinement of pedaling effectivity, a discount in pressure. The significance of this element lies with the very fact it permits riders to make modifications, enabling riders to carry out effectively, and higher of their sport or pastime.
A BMX rider transitioning from park driving to filth leaping experiences the influence of adjustability. Within the park, a decrease saddle place permits for larger freedom of motion throughout tips. Nevertheless, on the filth, a barely increased saddle can enhance pedaling energy and management on strategy to jumps. That is additionally evident in filth leaping, the place a decrease saddle offers superior maneuverability. The power to fine-tune the seat top permits the rider to adapt their bike to the particular calls for of every setting, optimizing efficiency. This, nevertheless, requires that the rider is aware of the way to alter and what must be adjusted. They have to additionally know the limitation of what they’re adjusting.
In conclusion, the essence of this element resides in its means to bridge the hole between standardized body geometries and the distinctive bodily traits of particular person riders. It transforms a static bicycle right into a dynamic device, adaptable to altering wants and preferences. This adaptivity, as it’s referred to, offers and creates a means for BMX riders to be environment friendly, and secure. The continued problem lies in creating designs that maximize adjustability with out compromising energy and stability, guaranteeing that riders can confidently discover the boundaries of their abilities. This hyperlink between match and bicycle element is important to grasp.
Regularly Requested Questions
The realm of BMX modification typically raises questions, significantly regarding elements like this prolonged half. The next makes an attempt to handle frequent uncertainties, offering clear steering primarily based on expertise and finest practices.
Query 1: Is an extended than normal element actually essential?
The necessity for a lengthier element relies upon solely on particular person circumstances. A taller rider, dealing with discomfort with an ordinary stem, advantages considerably. Take into account a six-foot rider contorted over a BMX body designed for somebody a lot shorter. A prolonged assist alleviates that discomfort, restoring correct leg extension and bettering pedaling effectivity. If discomfort or compromised driving place exists, an extended element warrants consideration.
Query 2: Can any prolonged model be fitted to a BMX body?
Compatibility is paramount. An extended model with an incorrect diameter is rendered ineffective. The body’s seat tube dictates the required diameter. A 27.2mm stem can’t be pressured right into a 25.4mm seat tube with out inflicting injury. Prior measurement and adherence to the body’s specs are non-negotiable.
Query 3: Does the fabric used considerably influence efficiency?
Materials choice is much from trivial. Chromoly metal gives superior energy and sturdiness, essential for aggressive driving. Aluminum, whereas lighter, sacrifices some energy. A avenue rider, subjecting their bike to heavy impacts, advantages from chromoly. A racer, prioritizing weight discount, may go for aluminum. The selection is a calculated trade-off.
Query 4: How essential is the clamp model to saddle safety?
The clamp model instantly dictates saddle safety. A single-bolt clamp, whereas easy, can slip underneath heavy masses. A double-bolt clamp offers enhanced clamping pressure. A pivotal system gives a streamlined, built-in design. A rider executing tailwhips requires the unwavering safety of a double-bolt or pivotal system. A unfastened saddle is a harmful legal responsibility.
Query 5: Will an extended stem negatively influence the bicycle’s dealing with?
An excessively longer than required model can compromise dealing with. It raises the middle of gravity, doubtlessly lowering stability and maneuverability. A rider looking for solely a slight top adjustment doubtless experiences negligible influence. Nevertheless, a drastic enhance in saddle top can noticeably alter the bike’s really feel. Moderation is vital.
Query 6: How typically ought to a BMX prolonged seat publish be inspected for injury?
Common inspection is essential. Fatigue, cracks, or bends can compromise structural integrity. A rider subjecting their bike to frequent abuse ought to examine the stem earlier than every journey. A visible verify for injury can stop catastrophic failure and potential damage. Vigilance is a small value for peace of thoughts.
These questions and solutions provide a place to begin. Additional analysis and session with skilled riders or bike mechanics are inspired. The choice of applicable elements is an ongoing journey.
The next part will delve into set up procedures and upkeep suggestions.
Navigating the Aftermarket
The realm of aftermarket elements might be treacherous. That is significantly true with seemingly simple gadgets. This part offers insights, born from expertise, into guaranteeing a considered choice. A phrase to the sensible: heed these insights as cautionary tales, classes discovered the laborious means.
Tip 1: Heed the Body’s Whisper
The body, that silent sentinel, dictates the diameter. Ignore its counsel at peril. A story is advised of a rider, blinded by aesthetics, forcing a stem right into a too-narrow seat tube. The body, careworn past its restrict, fractured. The rider escaped damage, however the body was ceaselessly ruined. Measure thrice, reduce by no means.
Tip 2: Resist the Attract of Untested Alloys
The market teems with finances choices, their alloys shrouded in thriller. A frugal rider, seduced by a tempting value, selected an unknown steel. Beneath the pressure of a easy soar, the element buckled, pitching the rider headfirst. The financial savings proved fleeting; dental work proved expensive. Respected producers earn their status.
Tip 3: Respect the Torque Wrench’s Authority
Over-tightening is an act of aggression in opposition to precision engineering. A novice mechanic, emboldened by ignorance, cranked down on a clamp bolt. The stem, subjected to undue stress, cracked internally. The failure remained hidden till a vital second, leading to a painful crash. Torque specs exist for a cause.
Tip 4: Lubricate the Interface, Mitigate the Creaks
Steel in opposition to steel, unprotected, breeds friction and noise. A rider, tormented by persistent creaks, uncared for lubrication. The friction regularly wore away the steel, creating play and instability. A easy utility of grease may have averted the aggravation and prolonged the element’s life. Silence speaks volumes.
Tip 5: Scrutinize the Welds, Search Flawless Fusion
Welds are the sinews of a metallic element. A discerning eye can detect weak point. A rider, inspecting a newly bought stem, observed porosity within the welds. Regardless of the aesthetic blemish, they put in and rode as typical. The stem failed. A cautious inspection might need prevented this crash.
Tip 6: Validate the Size, Keep away from Extremes
A stem prolonged past cheap limits turns into a lever, amplifying stress. A rider, looking for most top, selected a ludicrously lengthy stem. The extreme leverage made the body troublesome to manage. Reasonable adjustment brings finest outcomes.
Adhering to those pointers gives a level of safety in opposition to disappointment and potential hurt. Data, diligence, and a wholesome dose of skepticism are the rider’s finest protection in navigating the aftermarket. In the end, the hunt for the right element is a journey finest undertaken with open eyes and a cautious hand.
The end result of those insights brings us to the concluding remarks.
A Ultimate Reflection
The journey by way of the intricacies of the bmx prolonged seat publish has revealed its multifaceted nature. This can be a easy size of steel remodeled right into a vital component of rider consolation and efficiency. From materials choice to clamp model and adjustability, every facet contributes to the general driving expertise. Its a story not simply of bicycle elements however of understanding the very important intersection between rider physique, driving model, and the machine beneath.
The story of the prolonged publish is much from completed. Riders will proceed to hunt the right match, pushing producers to innovate and refine. As know-how advances, so too will the choices out there, every promising to reinforce consolation, enhance management, and, above all, preserve riders securely related to their bikes. The search continues, fueled by the countless pursuit of that good, tailor-made journey, one revolution at a time.
